How does a flat bed sewing machine work?
Flat bed sewing machine is an industrial sewing machine that uses two stitches of needle and shuttle to form lock stitch. It can sew two or more layers of sewing material or sew decorative stitch on the sewing material. It is the most basic type of industrial sewing machine. Sewn the double lock stitch is one of the most strong in all kinds of line mark, so use a very wide range, can make silk, linen, cotton, wool and chemical fiber fabric and soft leather, artificial leather, production of clothing, wearing supplies, bedding, bags, bag, tablecloth, curtains, etc., and can make two layers of silk to the multi-layer soft leather sewing work.
The flat sewing magic machine is composed of a head, a table and a frame. The clutch motor is installed on the bottom of the table, and the driving wheel is connected with the upper wheel of the head by triangular tape. By stepping down the pedal on the frame and controlling the tightening degree of the clutch, different magic speed of sewing can be obtained. The machine head is composed of cloth piercing, line picking and hook mechanism to complete the double-wire lock stitch. By the needle distance adjustment, automatic feeding and reverse sewing mechanism to achieve the needle distance can be set, continuous sewing; Stitch and seam are perfected by material pressure and thread tension adjusting and releasing device.
In order to adapt to the high speed operation of spindle 6000R /min and shuttle shaft 12000R /min, the engine head is equipped with impeller pump for oil supply and plunger pump for oil absorption to lubricate each moving component.The process of the flat sewing cutting machine to complete a lock stitch is to perforate the sewing material to lead the needle through the sewing material, and then make it bypass the shuttle line under the sewing material, and interweave the needle and shuttle line and tighten in the sewing material, and finally move the material forward or back a certain distance, and then punch and lead in the new position. At the end of the second process, a stitch is completed.
What are the types of flat sewing machines?
1. Ordinary medium speed flat sewing machine
Ordinary medium speed flat sewing magic machine adopts connecting rod line picking, spindle hook line, feeding, oil immersion tank line and manual lubrication, usually used in small and medium factories.
2. Ordinary high-speed flat sewing machine
The ordinary high-speed flat sewing machine adopts connecting rod line picking, spindle hook line and lower feeding. The machine generally adopts oil pump to supply oil, which automatically presses the lubricating oil to all moving parts, and the excess oil is sucked back or flowed back to the oil pan by itself. It is usually used in large factories.
3. Flat sewing machine with knife
The flat sewing machine with knife is equipped with a cutter on the right side of the needle, which can make the two processes of sewing magic and trimming edge simultaneously. In the part of the sewing material that does not need cutting edge, the hand handle can be used to make the cutter detached. The distance between the cutter and the needle is in the range of 3.2~9.5mm.
4. Double needle flat sewing machine
Double needle flat sewing machine with two needle and two vertical spindle, can make two lines of parallel sewing in a single operation. In the sewing and cutting operation, any machine needle can be lifted separately out of the sewing illusion, so that the left and right corners of the sewing will not produce the defect of stitch crossing. The distance between the two needles is 1.6a-16mm in a variety of specifications.